* 세금 및 배송비 포함 | 모든 가격은 기본 가격이며 구성에 따라 다를 수 있습니다
PowerLOG® PRO 30800 EMI
Double Polarized Broadband Horn Antenna
€8,998.00
In stock
SKU
205/005
KEYFACTS | |
---|---|
Design | Quad-ridged |
Active | No |
Gain (max.) | 14 dBi |
Connectors | 2x N (f) |
Mount | Mounting bracket |
Dimensions | 510x507x507 mm |
Weight | 8.8 kg |
Double polarized wideband horn antenna
The double polarized quad-ridged horn antennas of the PowerLOG® PRO series are characterized by enormous broadband performance and very high transmission power.
The gain increases with higher frequency up to max. approx. 14 dBi and generates a constant field strength, quasi-independent of the frequency. This predestines the PowerLOG® PRO 30800 especially for EMI compliance tests, since the amplifier does not have to be readjusted depending on the frequency. This saves a considerable amount of calibration and measurement effort.
Another special feature of the PowerLOG® PRO 30800 is its two inputs. This allows a horizontally or a vertically polarized measurement to be made without the need for an error-prone reconfiguration of the antenna. The PowerLOG® 30800 is suitable for both sending and receiving purposes. Due to the very high maximum transmit power of up to 500 W, the PowerLOG® is particularly suitable for EMC or interference emission measurements. The antenna is supplied incl. comprehensive, specific calibration data.
Highllights:
• Wide frequency range from 300 MHz - 8 GHz (calibrated up to 6 GHz)
• Supports very high power levels up to 500 W (CW)
• Constant field strength due to linear increasing gain
• High gain up to 14 dBi
• Horizontal and vertical measurement without rebuild
• Delivery includes specific calibration data
• Perfectly suited for EMC measurements with spectrum analyzers
• Dimensions: 510 x 507 x 507 mm
• Weight: 8,8 kg
The double polarized quad-ridged horn antennas of the PowerLOG® PRO series are characterized by enormous broadband performance and very high transmission power.
The gain increases with higher frequency up to max. approx. 14 dBi and generates a constant field strength, quasi-independent of the frequency. This predestines the PowerLOG® PRO 30800 especially for EMI compliance tests, since the amplifier does not have to be readjusted depending on the frequency. This saves a considerable amount of calibration and measurement effort.
Another special feature of the PowerLOG® PRO 30800 is its two inputs. This allows a horizontally or a vertically polarized measurement to be made without the need for an error-prone reconfiguration of the antenna. The PowerLOG® 30800 is suitable for both sending and receiving purposes. Due to the very high maximum transmit power of up to 500 W, the PowerLOG® is particularly suitable for EMC or interference emission measurements. The antenna is supplied incl. comprehensive, specific calibration data.
Highllights:
• Wide frequency range from 300 MHz - 8 GHz (calibrated up to 6 GHz)
• Supports very high power levels up to 500 W (CW)
• Constant field strength due to linear increasing gain
• High gain up to 14 dBi
• Horizontal and vertical measurement without rebuild
• Delivery includes specific calibration data
• Perfectly suited for EMC measurements with spectrum analyzers
• Dimensions: 510 x 507 x 507 mm
• Weight: 8,8 kg
크기 | 510 x 507 x 507 mm (L/B/H) |
---|---|
디자인 | Quad-ridged horn antenna |
주파수 범위 | 300MHz - 8GHz | 500W |
보증 | 2 years |
무게 | 8,8 kg |
이득(대표) | max. 14dBi |
RF 연결 | 2 x N (f) connections (H+V) or SMA connection via adapter |
인도시 포함되는 것 | PowerLOG 30800, specific calibration data |
최대 송신 전력 | 500 W |
명목상의 임피던스 | 50 Ohm |
극화 | H+V |
VSWR (대표.) | <1:2,5 |