계량기& 분석기

10MHz - 8GHz | 120MHz RTBW

USB Real-Time Spectrum Analyzer

10MHz - 8GHz | 120 MHz RTBW

USB Real-Time Spectrum Analyzer

10MHz - 8GHz | 245 MHz RTBW

USB Real-Time Spectrum Analyzer

10MHz - 8GHz | 120MHz RTBW

USB Real-Time Spectrum Analyzer

10MHz - 8GHz | 120 MHz RTBW

USB Real-Time Spectrum Analyzer

10MHz - 8GHz | 245 MHz RTBW

USB Real-Time Spectrum Analyzer

10MHz- 8GHz | 80MHz RTBW

Ultra Rugged Outdoor Real-Time Spectrum Analyzer

10MHz- 8GHz |120MHz RTBW

Ultra Rugged Outdoor Real-Time Spectrum Analyzer (PRO Edition)

9kHz- 8GHz | 245MHz RTBW

Ultra Rugged Outdoor Real-Time Spectrum Analyzer (Enterprise Edition)

10MHz - 8GHz | 160MHz RTBW

Mobile Dual Screen Real-Time Spectrum Analyzer

10MHz - 8GHz | 490MHz RTBW

Mobile Dual Screen Real-Time Spectrum Analyzer (PRO)

10MHz - 8GHz | 980MHz RTBW

Mobile Dual Screen Real-Time Spectrum Analyzer (ENTERPRISE)

9kHz - 6GHz | 40MHz RTBW

Remote Real-Time Spectrum Analyzer for outdoor use (IP66)

9kHz - 8GHz | 80MHz RTBW

Remote Real-Time Spectrum Analyzer for outdoor use (IP66)

10MHz-8GHz | 245MHz RTBW

Remote Real-Time Spectrum Analyzer for outdoor use (IP66)

10MHz - 8GHz | 1500MHz RTBW

High-End 19" UWB Server Rack

10MHz - 8GHz | 1000MHz RTBW

High-End 19" UWB Server Rack

10MHz - 8GHz | 500MHz RTBW

High-End 19" UWB Server Rack

1MHz 에서 9,4GHz까지

EMC 스펙트럼 분석기 대표 장비. 옵션인 TCXO 타임 베이스 등으로 프리 컴플라이언스 테스트에 완벽. 핸드 핼드 분석기로는 세계 기록적인 민감도로 -170dBm(Hz)까지 내려감.

1Hz - 1MHz (옵션인 20MHz / 30MHz)

본사 대표 EMC 스펙트럼 분석기. 프리 컴플라이언스나 30MHz에 이르는 EMC/EMI 테스트에 적합. 분석기의 기능을 최적화할 수 있는 부가 옵션 선택 범위 넓음.

1Hz - 1MHz (옵션인 20MHz / 30MHz)

NF-5030의 높은 전력 버전. 프리 컴플라이언스와 30MHz까지의 EMC/EMI 테스트에 적합. 분석기 기능을 확장할 수 있는 옵션에 대한 넓은 선택 범위. DIN/VDE 0848 (작업적) 에 따른 전 측정 범위

10MHz - 6GHz (opt. 8GHz), u. from 9kHz

Near-field measurement package to measure and locate sources of spurious radiation or monitor EMC problems at the component level.

10MHz - 6GHz (opt. 8GHz)

Far field measurement package for all EMC measurements up to 8GHz (EN55011, EN55022 etc.)

10MHz - 6GHz (opt. 8GHz), u. from 9kHz

Near- and far-field measurement package for all EMC measurements up to 8GHz (EN55011, EN55022 etc.)

1Hz - 9,4GHz

근접장 측정 장비로 방해 소스를 측정하거나 EMC 문제를 모니터링. 분석기 장비, 소프트웨어 그리고 프로브 세트 PBS2를 포함.

1Hz - 9,4GHz

EN55011, EN55022 등을 포함한 최대 9.4GHz의 모든 EMC 측정을 위한 원거리 장 EMC 측정 장비. 분석기 장비, BicoLOG EMC 안테나 그리고 허용치가 표시되는 소프트웨어.

1Hz - 9,4GHz

완벽한 EMC 측정 장비. EMC 세트1 & EMC 세트 2 를 조합. 어떤 도전적인 측정도 가능한 장비 세트. 비싸고 시간 소요되는 EMC 실험실 비용을 절약.

10MHz - 3GHz

Mobile spectrum monitoring package for measuring and locating sources of interference or monitoring frequency bands up to 80MHz.

10MHz - 6GHz

Mobile spectrum monitoring package for measuring and locating sources of interference or monitoring frequency bands up to 80MHz.

10MHz - 8GHz

Mobile spectrum monitoring package for measuring and locating sources of interference or monitoring frequency bands up to 80 MHz.

1Hz -1MHz / 1MHz - 9,4GHz

SPECTRAN HF-60100 V4 분석기, SPECTRAN NF-5030 그리고 HyperLOG 60100 안테나.

10MHz- 6(8)GHz

Rugged Outdoor Real-Time Spectrum Analyzer

- robust and IP65 rated
- powerful hardware
- also usable as counter-surveillance receiver

Gyro- & 기울기 센서, 나침반, 가속계를 가진 GPS 로거. PC 소프트웨어 포함. 몇 가지 종류의 아로니아 안테나에 함께 설치하여 사용할 수도 있고, 따로 사용할 수도 있다. 아로니아 스펙트럼 분석기와 호환.

Controls the RTSA Suite PRO via SCPI commands.

Extends an existing GPS Receiver to an accurate 10ns time server (NTP).

Offers an extremely accurate time and frequency base (5ppb TCXO or 200ppt OCXO)

Offers a local machine stream IO (similar to the HTTP block) but is much more efficient.

Adds an antenna rotation sync to the Spectra stream if the IsoLOG 3D DF antenna is running in chopper mode.

Removes all spurios or any other signal from the spectrum to offer a perfect clean spectrum.

Allows you to remove or to reduce single or multiple signals from the spectrum.

Allows the usage of an external dual GNSS satellite navigation system.

This block offers a powerful tracking generator, e.g. for rejection measurement of a DUT.

This block works like a sweep block but jumps to the bands of interest and skips the unwanted frequencies instead, which shortens sweep time and safes display space or recording capacity.

Allows to store a Tx pattern generator config file inside SPECTRAN^® V6.

This block creates an audio signal proportional to the signal strength. A map can be displayed to show the direction of the signal source.

The IQ WiFi Interaction Mapper block decodes MAC, Vendor, SSID and Protocol of all WiFi channels and shows the interaction between the nets.

The RF Drive Test block provides a powerful RF drive testing solution.

Offers a fully automatic digital signal burst/pulse classification and demodulation/decoder.

Allows the usage of an external USB-controlled RF SP4T Switch 1->4 or 4->1.

Measures the power ratio between the configured main channel and the channels around it.

Allows the usage of any Tektronix USB RSA series analyzer.

Allows to easily control SPECTRAN V6 Signal Generator to sweep the entire frequency range 75MHz to 6GHz.

Allows the controlling of an external NRQ6 PowerSensor.

Allows the controlling of an external NRP-Z11 PowerSensor.

Offers a real-time IP3 (TOI) measurement.

Offers a real-time THD measurement.

Allows the Suppression of very short Bursts automatically to ensure measurement quality.

Supports multiple V6 Receiver in Sweep Mode

HTTP access to a remote RTSA Suite PRO system (client)

HTTP access to a remote RTSA Suite PRO system (server)