GPS Logger including Gyro / Tilt / Compass & Accelerometer
The Aaronia GPS - Logger includes a total of 6 sensors, all of them on the cutting edge of technology, making it the world's first stand-alone data logger with such a variety of sensors. Not to forget is also the very small form factor and the extremely high data rate of approx. 35 logs/second (freely adjustable). The logger with battery weighs just 88 grams
The following sensors are integrated in the logger:
- High End GPS sensor incl. antenna position, speed and altitude information with a sensitivity of -165 dBm and accuracy of 1,8m (CEP95)
- 3D compass with 1-2 degree precision
- 3D/Triaxial acceleration sensor with up to 4 mg resolution
- 3D/Triaxial Gyro / Tilt sensor with a sensitivity of 14 LSBs per second
- Altimeter / Pressure sensor with very high accuracy / resolution and a wide pressure range of 260 - 1260mbar and a height resolution of up to 20cm
Of course, the Aaronia GPS Logger can also be used for other purposes.SPEED/DATA VOLUME The Aaronia GPS-Logger offers a very fast update rate of up to 35 complete logs with all sensor data per second (on µSD-Card and/OR USB-Streaming) offering a "real time" display of the unit orientation. At maximum rate the Aaronia GPS-Logger will produce around 50MB/hour (uncompressed)! The maximum usable µSD volume is 2GB, offering a maximum recording time of about 2 days at full speed on the µSD card. The data rate can be adjusted to much lower rates to keep data volume much lower offering long time recording on the µSD card over weeks or even months.
OPERATION The Aaronia GPS - logger can be used with the internal LiPo battery (standalone) and / or USB (provides unlimited operating time).
The logger has three operating modes: - Streaming / logging on the internal (removable) μSD Card, completely independently as a stand- alone device - Continuous recording via USB port (PC, Linux or MAC OS) - Transfer of files stored in internal μSD Card (PC, Linux or MAC OS)
ASSEMBLY The Aaronia GPS - logger can be mounted directly on HyperLOG X, BicoLOG and HyperLOG EMI antennas (screws and adapter included). It can also be mounted on any other device , car, etc. with the included adapter. This only requires 2 holes to be drilled to attach the supplied adapter.
|Country of Manufacture||Germany|
|Included with delivery||GPS logger, carrying case with foam inserts, 650mAh LiPo battery (built-in), Aaronia USB cable, 1GB μSD card, μ on SD / Mini SD Adapter, USB Reader, Evaluation Software (PC, Linux, and Mac OS), mounting rail and screws|