Meters & Analyzers

1Hz bis 1MHz (opt. 20MHz / 30MHz)

Our EMC spectrum analyzer flagship. Suitable for Pre-Compliance and EMC/EMI tests up to 30MHz. Wide range of additional options to optimize the analyzer functionality.

1Hz to 1MHz (opt. 20MHz / 30MHz)

High Power version of the NF-5030. Suitable for Pre-Compliance and EMC/EMI tests up to 30MHz. Wide range of additional options to optimize the analyzer functionality. Full measurement range for DIN/VDE 0848 (Occupational).

10MHz - 6GHz (opt. 8GHz), u. from 9kHz

Near-field measurement package to measure and locate sources of spurious radiation or monitor EMC problems at the component level.

10MHz - 6GHz (opt. 8GHz)

Far field measurement package for all EMC measurements up to 8GHz (EN55011, EN55022 etc.)

10MHz - 6GHz (opt. 8GHz), u. from 9kHz

Near- and far-field measurement package for all EMC measurements up to 8GHz (EN55011, EN55022 etc.)

1Hz - 9,4GHz

Near Field Measurement Kit to measure any interference sources or monitoring EMC problems. Including Analyzer-Kit, software & Probe-Set PBS2.

1Hz - 9,4GHz

Far Field EMC Measurement Kit for all EMC measurements up to 9,4GHz incl. EN55011, EN55022 etc.. With Analyzer-Kit, BicoLOG EMC antenna and software with limits display.

1Hz - 9,4GHz

Perfect EMC Measurement Kit. Combines EMC Bundle 1 & EMC Bundle 2. Be perfectly equipped for any measurement challenges. Save expensive and time-consuming EMC laboratory costs.

10MHz - 3GHz

Mobile spectrum monitoring package for measuring and locating sources of interference or monitoring frequency bands up to 80MHz.

10MHz - 6GHz

Mobile spectrum monitoring package for measuring and locating sources of interference or monitoring frequency bands up to 80MHz.

10MHz - 8GHz

Mobile spectrum monitoring package for measuring and locating sources of interference or monitoring frequency bands up to 80 MHz.

1Hz -1MHz / 1MHz - 9,4GHz

SPECTRAN HF-60100 V4 Analyzer, SPECTRAN NF-5030 and HyperLOG 60100 antenna.

GPS-Logger with Gyro- & Tiltsensor, Compass and Accelerometer. Incl. PC Software. Fits on several Aaronia Antennas, also usable as standalone device. Compatible to Aaronia Spectrum Analyzers.

30MHz - 7250MHz

Protects sensitive electronics from damage due to excessive high frequency interference up to max. 2.5 Watt (approx. +33dBm)

DC - 8GHZ

6-Way Splitter/Combiner OEM

This block generates measurement tables about complex RF power measurements, which can be exported as CSV, XML or JSON.

Offline Map Functionality for RTSA-Suite PRO Software for a dedicated continent of choice (e.g. Europe)

True DC - 8GHz

ACTIVE Low Loss 6-Way Splitter

700MHz - 6GHz

ACTIVE Low Loss 4-Way Splitter

Controls the RTSA Suite PRO via SCPI commands.

Extends an existing GPS Receiver to an accurate 10ns time server (NTP).

Offers an extremely accurate time and frequency base (5ppb TCXO or 200ppt OCXO)

Offers a local machine stream IO (similar to the HTTP block) but is much more efficient.

Adds an antenna rotation sync to the Spectra stream if the IsoLOG 3D DF antenna is running in chopper mode.

Removes all spurios or any other signal from the spectrum to offer a perfect clean spectrum.

Allows you to remove or to reduce single or multiple signals from the spectrum.

Allows the usage of an external dual GNSS satellite navigation system.

This block offers a powerful tracking generator, e.g. for rejection measurement of a DUT.

This block works like a sweep block but jumps to the bands of interest and skips the unwanted frequencies instead, which shortens sweep time and safes display space or recording capacity.

Allows to store a Tx pattern generator config file inside SPECTRAN^® V6.

This block creates an audio signal proportional to the signal strength. A map can be displayed to show the direction of the signal source.

The IQ WiFi Interaction Mapper block decodes MAC, Vendor, SSID and Protocol of all WiFi channels and shows the interaction between the nets.

Allows the usage of an external USB-controlled RF SP4T Switch 1->4 or 4->1.

Measures the power ratio between the configured main channel and the channels around it.

Allows the usage of any Tektronix USB RSA series analyzer.

Allows to easily control SPECTRAN V6 Signal Generator to sweep the entire frequency range 75MHz to 6GHz.

Allows the controlling of an external NRQ6 PowerSensor.

Allows the controlling of an external NRP-Z11 PowerSensor.

Offers a real-time IP3 (TOI) measurement.

Offers a real-time THD measurement.

Allows the Suppression of very short Bursts automatically to ensure measurement quality.

HTTP access to a remote RTSA Suite PRO system (client)

HTTP access to a remote RTSA Suite PRO system (server)

Allows the usage of an external Positioning System Device in RTSA-Suite PRO.

Allows the usage of the system camera (PC internal or USB) in RTSA-Suite PRO.

Multi Stream Logger Block allows to merge and store up to 16 streams (IQ and/or Spectra).

Allows the multiplexing of up to 16 streams (IQ or Spectra) to one single output stream.